Forums » Introduce Yourself

will gradually veneer pressure floor

    • 255 posts
    March 4, 2018 4:59 PM PST

    will gradually veneer pressure floor

    and then laid. The binder can be used commercially available "PVA", "PAA", "7990" and other special adhesive. When the shop will be as thin as possible and adhesive evenly on the back and on the ground plastic coated with a layer of a scraper (0.4 - 0.6 mm), the plastic end of adhesive,

    and hand slowly will gradually veneer pressure, so it is easy to remove air bubbles, which accurately posted on the reservation. If there are local grievances, using a rubber hammer or block off the bubble. Three. After 48 hours of maintenance, the wax can be waxed.

    After the waxing should be regularly, to avoid water dragging, otherwise it will occur degumming and warping. Watch out for cigarette butts off caused by coke eyes on the plastic surface, but also to prevent the sharp metal objects caused on the ground. When putting furniture, it is better to place a larger hard pad on the foot to avoid a long dent. The face is dirt,

    wooden fences out door
    mdf ceiling cladding
    florida house exterior design pictures
    wholesale composite deck railing planter holders